环境空气质量新标准下评价体系重点解读

随着环境空气质量新标准的发布,一系列空气质量实时发布和评价方法相继发布,且短时信息发布和长期质量评价之间的关系较为复杂,易造成基层评价人员和公众的困惑和疑问.结合国家几个相关技术规范文件,对空气质量实时发布方法前后变化、每月各城市排名通报以及月度、年度评价公布结果进行重点解读,说清各评价方法之间的不同之处及其带来的评价结果变化,为指导基层空气质量评价工作和公众了解官方空气质量发布内容起到一定的作用.     

明矾石在水体微藻去除中的应用研究

以温州市某大学校区内富营养化水体为研究对象,采用本地明矾石对含藻水体进行混凝除藻、除浊实验研究,分别进行投加量、搅拌强度、搅拌时间、静置时间及pH值对微藻去除效率的影响研究,以获得处理工艺的最佳条件,为恢复河流水体生态自净功能提供理论基础.试验中对投加明矾石前后,水体中浊度、总磷、氨氮和总氮进行了测定,结果表明：明矾石最佳投加量为0.35 g/L,最佳搅拌方式为200 rpm搅拌4 min;最佳静置时间为25 min;在碱性或中性水体的处理效果尤佳.     

基于MATLAB的BP神经网络模型在漠阳江水质评价中的应用研究

为提高水质评价的准确性,基于MATLAB及人工神经网络理论,采用误差反向传播的BP算法建立漠阳江水质评价模型,充分利用神经网络的非线性映射特性,取7项常规地表水水质评价指标对漠阳江水质进行评价,并将BP神经网络评价结果与单因子评价法及综合指数法的评价结果进行比较,网络运行结果表明一致效果良好.同时较传统的水质评价方法,该网络具有较高的识别精度,提高了水质评价等级的准确性,使评价的结果更具有科学性.     

大气降水中重金属离子特征研究

大气降水中重金属离子的研究可以反映大气污染、地表水污染的信息.通过对国内外大气降水中重金属研究现状的阐述和大气降水中重金属的来源进行理论分析,并利用实地大气降水采样分析,归纳出其中重金属的特征,监测当前大气的污染状况,从而为区域性的大气中重金属的污染评价及污染治理提供理论依据.降水中的重金属元素主要包括Pb、Mn、Zn、Cu、Cd、Cr等,通过分析测定可以为利用大气降水作为重要饮用水补给源的区域提供饮水安全保障.     

渭河流域关中段城镇污水处理厂污泥处理技术调查与分析研究

根据渭河流域关中段的污染状况及《(渭河流域水污染防治三年行动方案(2012-2014年)》对科技攻关的实际需求,采用资料搜集、实地调查、问卷发放、数理统计等方式对渭河流域关中段55座城镇污水处理厂的污泥处理情况进行了调查与分析。根据调查分析结果,提出了渭河流域关中段城镇污水处理厂污泥处理技术在应用过程中存在的一些问题,并结合该流域实际情况提出了相应建议,期望能够对该流域污泥处理技术的良性发展提供"第一手"的参考资料。     

微纳米气泡改善杭州城市河道水生态环境的工程应用研究

于2013年4月至6月在杭州城市河道对微纳米气泡改善河道水生态环境进行了持续的原位监测实验.结果表明,与对照区相比,试验区水体温度平均升高0.7℃,pH增大0.2,溶解氧增加1.0 mg/L,而TDS浓度降低42 mg/L;水质污染指标高锰酸盐指数、总氮、氨氮、总磷平均浓度分别降低了8.45 mg/L、6.78 mg/L、8.90 mg/L和0.58 mg/L.由此可推测微纳米气泡在一定程度上能有效净化水质,为恢复良好水生生态环境提供新的方法和技术手段.     

Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.     

Quantitative method to determine the regional drinking water odorant regulation goals based on odor sensitivity distribution：Illustrated using 2-MIB

Taste and odor （T/O） in drinking water often cause consumer complaints and are thus regulated in many countries. However, people in different regions may exhibit different sensitivities toward WO. This study proposed a method to determine the regional drinking water odorant regulation goals （ORGs） based on the odor sensitivity distribution of the local population. The distribution of odor sensitivity to 2-methylisobomeol （2-MIB） by the local population in Beijing, China was revealed by using a normal distribution function/model to describe the odor complaint response to a 2-MIB episode in 2005, and a 2-MIB concentration of 12.9 ng/L and FPA （flavor profile analysis） intensity of 2.5 was found to be the critical point to cause odor complaints. Thus the Beijing ORG for 2-MIB was determined to be 12.9 ng/L. Based on the assumption that the local FPA panel can represent the local population in terms of sensitivity to odor, and that the critical FPA intensity causing odor complaints was 2.5, this study tried to determine the ORGs for seven other cities of China by performing FPA tests using an FPA panel from the corresponding city. ORG values between 12.9 and 31.6 ng/L were determined, showing that a unified ORG may not be suitable for drinking water odor regulations. This study presents a novel approach for setting drinking water odor regulations.     

Characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China

To understand the pollution characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China, total suspended particulate(TSP) and PM10samples were collected in cities of Changsha, Zhuzhou and Xiangtan from December 2011 to January 2012, and heavy metals of Cd, Pb, Cr, and As were analyzed. It shows that the average TSP concentration in Changsha, Zhuzhou and Xiangtan were(183 ± 73),(201 ± 84) and(190 ± 66) μg/m3respectively, and the average PM10 were(171 ± 82),(178 ± 65) and(179 ± 55) μg/m3respectively. The lowest TSP and PM10concentrations occurred at the background Shaping site of Changsha. The average ratio of ρ(PM10)/ρ(TSP) was 91.9%, ranging from 81.3% to 98.9%. Concerning heavy metals, in TSP samples, the concentration of Cr, As, Cd and Pb were 28.8–56.5, 18.1–76.3, 3.9–26.1 and 148.0–460.9 ng/m3, respectively, while in PM10samples, were 16.4–42.1, 15.5–67.9, 3.3–22.2 and 127.9–389.3 ng/m3, respectively. The enrichment factor of Cd was the highest, followed by Pb and As, while that of Cr was the lowest.